Brewery Accessories

The Brew Kit 25L is the perfect complement to your automatic brewery - we've put together the things you need to start brewing. Just add bottles and Recipe Kits (ingredients).Brew Kit 25L contains:- 25-liter (30L max) fermenter with med tap och lid- 25-liter (30L max) fermenter with lid (no tap)- Fermenter air lock- Bottle filler (fits the fermenter tap)- Automatic pump siphon 44cm (Note: without holder and clamp)- Grifo Bench Capper- Mash Paddle 52cm- Thermometer- Bottle Washer Spin Mini- SanitizerNote: Does not contain bottles or ingredients.

Whirlpooling and aerating is good practice before you pump the wort out of your brewing system. It infuses oxygen which promotes enhanced yeast activity and places the hops and protein back into suspension before the filtering process. The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pass through its large blades. Just simply attach to a standard electric power drill via its ‘chuck bit’ styled end for relaxed aeration of your wort. Grainfather Whirlpool and Aeration Paddle:- 304 stainless steel, 8mm (1/3”) drill bit end and 12.5 cm (5”) wide blades- Designed to be easily attached to a power drill via an 8mm (1/3”) drill bit style end- Plugged at the end- 56cm (22”) long, perfect for use in large boilers and smaller stove top kettles- 12.5cm (5”) wide blades to create a strong aeration and whirlpool

Bulldog Mash Paddle in 304 Stainless Steel. 61cm in length.

Coobra Mash Paddle in 304 Stainless Steel. 60cm in length.

Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 300 micronsTotal length: 46cmLength of mesh basket: 35cmDiameter top: 15cmDiameter bottom: 10cm

Brewster Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 500 micronsTotal height: 38 cmCylinder height: 36 cmDiameter opening: 15 cmDiameter bottom: 10 cm

This Hop Spider keeps hops together during the boil. It can be used on all appropriate sized boil pots, including the Grainfather. Made with a coarser, 800 micron mesh, for maximum wort flow and increased hop utilisation. This spider can be used for any kind of hops, including hop pellets.Although it is not a necessity in brewing with the Grainfather brewing system, it is a popular product. This has therefore been designed with a specifically fitted hook design which can be hooked onto the side of any brew pot or the Grainfather support ring. Perfect for those of you who would like the reassurance of a hop spider when brewing. Mangrove Jack's Hop Spider (Grainfather)Diameter: 15 cm Length: 30 cm Material: 800 micron 304 grade stainless steel mesh, with stainless steel support band and single hook

Bulldog Hop Spider that fits breweries ad kettles up to 38cm in diameter.InfoMaterial: 304 stainless steelMesh size: 300 microns (0.3mm)Height: 30 cmDiameter: 20 cmLength steel rods: 9 cm (M8 screws)

This High Performance Cleaner is specially formulated to be used with the Grainfather. It removes hard to clean proteins from your Grainfather without the need for tedious scrubbing. Perfect for cleaning hard to reach places such as the counter flow wort chiller, pipes and pumps.This is suitable for soft (copper) and hard (stainless steel) metals which not many other cleaners do. It is important you use this to clean your Grainfather as other cleaners may, over time, damage your system.Use- Add 2 Tbsp of cleaner to 15 L of water at 60°C to your Grainfather. - Attach the counter flow wort chiller and recirculate the cleaner for 15 minutes. - Remove the counter flow wort chiller and attach the recirculation pipe and recirculate for another 5 minutes. - Rinse all surfaces that came in contact with the cleaner thoroughly with winter. - Gently scrub the inside of the boiler with a soft bristle brush to remove left over stains. Rinse and drain.

Cooling Spiral 7,5m in stainless steel for faster cooling of the wort. The fittings fit 3/4-inch Quck Connect garden hose connectors.Spiral tube diameter: ca 10 mmSpiral height: ca 90 mmTotal height: ca 400 mmTotal spiral diameter: ca 255 mmThreads: 3/4" (fit 3/4-inch Gardena-style garden hose connectors)

Cooling Spiral 15m in stainless steel for faster cooling of the wort. The fittings fit 3/4-inch Quick Connect garden hose connectors.Spiral tube diameter: 10 mmTotal diameter: 24 cmTotal height: 69 cmThreads: 3/4-inch (fit 3/4-inch Gardena-style garden hose connectors.)

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Plastic Head.Do not run the pump dry.Specifications Magnetic Pump MP-15RMCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" threaded males on both input and outputVoltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Stainless Steel Head.Do not run the pump dry.Specifications Magnetic Pump MP-15RM Stainless Steel HeadCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" BSP threaded males on both input and outputVoltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Digital spoon scale with 3 different size spoons. Perfect when measuring water treatments or hops. High 0,1 gram precision.- Weighs up to 500 grams with 0,1g precision.- Choose between 4 units: gram, oz, gn eller ct.- Easy to clean: just remove  the spoon and wash.- Easy-to-read LCD-display.- Energy saving auto-off function.- Tare and Hold function.- Batteries not included (2pcs 5V AAA).- Manual in English.

Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfather Counter Flow Chiller. Avoid long lag time and off flavours by using the Grainfather Wortometer. Adjust your wort and water flow rates from the Grainfather Counter Flow Chiller by dialling in the exact wort temperature your specific yeast requires. Requires a flexible 5-8 mm inner diameter silicon hose (not included). Instructions:https://www.grainfather.com/media/wysiwyg/V2_GF_WORTOMETER_INST_WEB.pdf

Spare part: Roller (crush roller) to Bulldog Malt Mill. 1pcs (2pcs are needed)

Heavy duty stainless steel mash paddle from Brewly. Length 60cm.

Whirlpool arm for Brewster 70L that fits onto the existing recirculation pipe. It recirculates the wort and thereby making a whirlpool at the bottom of the kettle.Length 39,5 cm.

Hexagon Double Nipple NPT 1/2" to NPT 1/2". Stainless steel. Fits amonst other things Lauter-Helix 1000mm.

The Brewly Hop Spider keeps hops together during the boil, separated from the wort. It can be used on most breweries and kettles. This spider can be used for any kind of hops, including hop pellets.Brewly SS500 Hop SpiderDiameter: 15 cm Height: 35,5 cm Material: 500 micron 304 grade stainless steel mesh, with stainless steel support band and single hook

The Brewly Hop Spider keeps hops together during the boil, separated from the wort. It can be used on most breweries and kettles. This spider can be used for any kind of hops, including hop pellets.Brewly SS800 Hop SpiderDiameter: 15 cm Height: 35,5 cm Material: 800 micron 304 grade stainless steel mesh, with stainless steel support band and single hook

Fine-mesh bottom filter to avoid larger particles in the wort during mashing. Also fits Brewolutions Brewster.

Tap made in 304 stainless steel that fits most breweries. Rubber covered handle with auto-lock function. 1/2" thread with stainless 1/2" nut and silicone seal. 13mm barb at the opening.Tappkran i rostfritt stål som passar de flesta bryggverk. Gummitäckt handtag med autolåsfunktion. 1/2" gänga och levereras med rostfri 1/2" mutter samt silikonpackning. 13mm nippel på utloppet. Tillverkad i 304-rostfritt stål.

Glass cap that fits both 40L and 70L Brewly breweries.

Spare part. Brewly L-pipe for Brewly Brewery 40L and 70L Pump Inlet. Material is stainless steel. Keeps hop and malt debris at the bottom of the brewery from entering the pump inlet. May also fit Brewolution BB40 and BB70 which has similar construction.The pipe inlet is ca 40mm above the brewery's bottom. Total height avobe bottom is ca 45mm. The pipe length horizontally is ca 110mm.

Lauter-Helix 1000mm is a stainless steel , flexible spiral filter tube made to filter the vort from hops and debris between brewery/kettle and fermenter. Easy to clean by hnd or dish washer. Fitting: NPT 1/2".Can replace the bazooka filter in Coobra CB3 and CB5 together with a "Hexagon double nipple connector NPT 1/2" to NPT 1/2" which is sold seperately. May also fit other breweries.

Insulation jacket for the Brewly 30L Conical Fermenter (both versions). Material: 5 mm neoprene foam.

Whirlpool arm for Brewster 40L that fits onto the existing recirculation pipe. It recirculates the wort and thereby making a whirlpool at the bottom of the kettle.Length 35,5 cm.

Stainless Whirlpool Arm with CAM-lock connector, makes it possible to create a whirlpool in the wort after the boil which increases volume efficiency and speeds up the cooling of the wort. Black neoprene handle.Brewly Whirlpool Arm CAM-lockLength: 40cm, usefull length 35cm.Material: Stainless Steel 304.

Heat insulation for the Brewly 70L brewery. Provides faster heating, more vigorous boil and reduces energy consumption. Material: 5 mm neoprene foam.

Heat insulation for the Brewly 40L brewery. Provides faster heating, more vigorous boil and reduces energy consumption. Material: 5 mm neoprene foam.

Much smoother and easier to keep clean than a net / hop bag. Used in the pot during brewing. Made from stainless steel with a diameter of 9.5 cm and includes a chain for easy submersion.

Brewolution Pump hose Beacon 40L. Silicone. Spare part.

QuickCarb™ from Blichmann Engineering™ makes it possible to carbonate a 19L corny keg of beer in less than an hour! The beer is pumped by a simple self-priming pump, while the stainless diffusion stone injects CO2 into the beer. This results in a quick carbonation without risk of overcarbonation. Even though the pump is self-priming, it can be necessary to lower it initially when starting up the pump.After less than an hour the beer will be carbonated and could be served, but it migh need to rest for a day before fine-tuning the carbonation level.QuickCarb™ can also be used for inline oxygenation! Simply add an oxygen regulator and you'll be able to use the QuickCarb™ components to oxygenate your wort before pitching your yeast.The 10 micron stainless diffusion stone is durable, and porous enough to allow sanitizer to fully penetrate.Blichmann QuickCarb Includes:- Circulating pump with adapter- 10 micron stainless diffusion stone- Vinyle tubing for beer and gas- Threaded ball lock disconnect for beer and gas- QuickConnector, 3 pcs

Graduated volume tube in polycarbonate that fits the Brewly 70L brewer.

Graduated volume tube in polycarbonate that fits the Brewly 40L brewer.

Stainless steel bottom filter for Brewster Beacon 40 and 70-liter. Brewolution has developed a completely new "false bottom" that connects directly to the inlet to the pump instead of lying loose over the entire bottom. Instructions can be found here!

Magnetic Pump MP-10RN, spare part for Brewly Breweries, also fits other breweries. Up to 12L/min. Very quiet, high quality, powerful magnetic pump that can handle wort/water up to 100°C, however its not recommended under sustained periods. Perfect for recirkulating wort and transfer of wort/drikning water. Standard 14mm inlet/outlet.Do not run the pump dry.Specifications Brewly Magnetic Pump MP-10RNCapacity: max 12 L/min (60Hz)Head: max 2,1 meters (60Hz)Power rating: 6WVoltage: 220-240V (50-60Hz)Protection: IP44Tube Interface Inlet: 14 mmTube Interface Outlet: 14 mmNote: Do not run the pump dry

Spare part pump MP-10RN for Coobra CB3 & CB5. Standard 14mm input/output. Standard pump for many breweries. Colours may vary.

Grainfather Magnetic Pump MP-10RN with C14 plug. Original. Standard 14mm input/output.

Plastic Head for Magnetic Pump MP-15RM (spare part).