Kegs

A complete barrel kit with gas bottle included. The kit contains the following products: - 18L Cornelius barrel (used )Cornelius barrel 18 liters (5 gallons) with ball cap and protective rubber around the ball joints and at the bottom. High quality from Italy. Materials: Stainless steel and rubber. NOTE! Used barrels. The barrels are in very good condition, washed. Supplied pressurized. Minor signs of use may be present. There may be a mark on the barrel and the rubber in the handle may be a little dry and in some cases slightly discolored (rubber care agent or vinyl gloss can remedy this).Height: approx. 565 mm Diameter: approx. 232 mm Weight: approx. 4.5 kg - Regulator for Sodastream bottleRegulator that fits sodastream bottles. Pushfit adaptor for the hose (3/8"). We recommend the use of a non-return valve to prevent liquid in the regulator.- Carbohydrate cartridge (filled)One trapezoidal threaded carbonation cartridge in a small and handy format that can be used both to carbonate your beer and to make sparkling water. A filled 425g cartridge can carbonate between 60-80L of Beer. (NOTE! Bottle color is random)- 1m 3/8 PE hose Pe-slang is a rigid hose that is perfect for beverage and gas handling and is more or less a standard in the catering industry.- 2m Sewing thread kitThis is a kit that contains the entire beer side of a cornelius keg - everything from k ul connection to tap Picnic - a so-called sewing thread shit. The long and narrow hose (2 meter long) provides a strong pressure drop that allows you to tap properly carbonated beer without it foaming too much. This type of hose is often called restrictor hose or sewing thread hose. Delivered pre-assembled. Color and appearance may vary.- Threaded ball coupling for gas (white/grey)Self-closing quick coupling for cornelius kegs with ball socket. White/grey coupling that fits the barrel valve for gas. Thread: 1/4" MFL (equivalent to 7/16" UNF).- Fluidfit threaded quick coupling FluidFit® HCF-UNF quick coupling (so-called pushfit) Coupling with internal thread UNF that fits on threaded ball coupling for barrels.

A complete barrel kit with gas bottle included. The kit contains the following products: - 9L Cornelius barrel (used )Cornelius barrel 9 liters with ball cap and protective rubber around the ball joints and at the bottom. High quality from Italy. Materials: Stainless steel and rubber. NOTE! Used barrels. The barrels are in very good condition, washed. Supplied pressurized. Minor signs of use may be present. There may be a mark on the barrel and the rubber in the handle may be a little dry and in some cases slightly discolored (rubber care agent or vinyl gloss can remedy this). - Regulator for Sodastream bottleRegulator that fits sodastream bottles. Pushfit fitting for the hose (3/8"). We recommend the use of a non-return valve to prevent liquid in the regulator.- Carbohydrate cartridge (filled)One trapezoidal threaded carbonation cartridge in a small and handy format that can be used both to carbonate your beer and to make sparkling water. A filled 425g cartridge can carbonate between 60-80L of Beer. (NOTE! Bottle color is random)- 1m 3/8 PE hose Pe-slang is a rigid hose that is perfect for beverage and gas handling and is more or less a standard in the catering industry.- 1m Sewing thread kitThis is a kit that contains the entire beer side of a cornelius keg - everything from k ul connection to tap Picnic - a so-called sewing thread shit. The long and narrow hose (1 meter long) provides a strong pressure drop that allows you to tap properly carbonated beer without it foaming too much. This type of hose is often called restrictor hose or sewing thread hose. Delivered pre-assembled. Color and appearance may vary.- Threaded ball coupling for gas (white/grey)Self-closing quick coupling for cornelius kegs with ball socket. White/grey coupling that fits the barrel valve for gas. Thread: 1/4" MFL (equivalent to 7/16" UNF).- Fluidfit threaded quick coupling FluidFit® HCF-UNF quick coupling (so-called pushfit) Coupling with internal thread UNF that fits on threaded ball coupling for barrels.

Cornelius keg 23 liter (6 gallon) with ball-lock and protective rubber around the ball locks and bottom. Very high quality.PPRV (Pressure Release Valve): 7-9 Bars (100-135 PSI)Materials: Stainless steel SS304 and rubberHeight: 670 mm (± 2 mm)Diameter: 219 mm (± 2 mm)Weight: 4.8 kg (shipping weight 10 kg)Made by A.E.B. In Italy

Cornelius keg 18-liter (5 gallons) with ball lock and protective rubber around the ball couplings and at the bottom. High quality from Italy. Material: Stainless steel and rubber.NOTE! Used kegs. The kegs are in very good condition, washed. Delivered pressurized. Minor signs of use may occur. There may be a mark on the barrels and the rubber in the handle may be a little dry and in some cases discolour slightly (rubber preservative or vinyl gloss can remedy this).Note: Keg looks and design may vary, pictures are to illustrate only.Height: approx. 565 mmDiameter: about 232 mmWeight: about 4.5kg

Cornelius keg 12 liter (3.2 gallon) with ball-lock and protective rubber around the ball locks and bottom. Very high quality.Materials: Stainless steel SS304 and rubberHeight: 422 mm (± 2 mm)Diameter: 219 mm (± 2 mm)Weight: 4.2 kg (shipping weight 6.5 kg)Made by A.E.B. In Italy

Cornelius keg 9 liter (2.4 gallon) with ball-lock and protective rubber around the ball locks and bottom. Very high quality.Materials: Stainless steel SS304 and rubberHeight: 340 mm (± 2 mm)Diameter: 219 mm (± 2 mm)Weight: 3.7 kg (shipping weight 5.5 kg)Made by A.E.B. In Italy

Cornelius keg 9-liter with ball lock and protective rubber around the ball couplings and at the bottom. High quality from Italy. Material: Stainless steel and rubber.NOTE! Used kegs. The kegs are in very good condition, washed. Delivered pressurized. Minor signs of use may occur. There may be a mark on the barrels and the rubber in the handle may be a little dry and in some cases discolour slightly (rubber preservative or vinyl gloss can remedy this).Please note that looks and design may vary, images are only illustrative.Height: approx. 340 mmDiameter: about 232 mmWeight: about 3.5kg

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L Size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.This the stainless steel Kegmenter comes with airlock and flat plate however you can also use this kegmenter under pressure if you want to. If you want to use this Kegmenter under pressure then we would recommend that you purchase the lid with ball lock posts and pressure relief vale.The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can force carbonate using the Pressure Kit (sold seperately).Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.SpecificationsVolume: 29L (7.6 Gallons)Maximum Working Pressure: 2.5 BARTest Pressure: 5 BAR Wall Thickness (Body/Chimes): 1.8mm/2.1mmDiameter: 39,5cmHeight: 38cmDatasheetClick here to open the datasheet

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L Size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.This the stainless steel Kegmenter comes with airlock and flat plate however you can also use this kegmenter under pressure if you want to. If you want to use this Kegmenter under pressure then we would recommend that you purchase the lid with ball lock posts and pressure relief vale.The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can force carbonate using the Pressure Kit (sold seperately).Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.SpecificationsVolume: 29L (7.6 Gallons)Maximum Working Pressure: 2.5 BARTest Pressure: 5 BAR Wall Thickness (Body/Chimes): 1.8mm/2.1mmDiameter: 39,5cmHeight: 38cmMaterial: 304 Stainless steelDatasheetClick here to open the datasheet

Small keg with quick-connectors for gas and beer. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 3 liters Height: 27.5 cm (33 cm incl. quick connector valve) Diameter: 13.5 cm Weight: 950 g Manufacturer: Mangrove Jack's

Small keg with quick-connectors for gas and beer. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 5 liters Height: 28 cm (33,5 cm incl. quick connector valve) Diameter: 17,5 cm Weight: 1280 g Manufacturer: Mangrove Jack's

Small keg with quick-connectors for gas and beer. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 10 liters Height: 49 cm (54,5 cm incl. quick connector valve) Diameter: 17.5 cm Weight: 1950 g Manufacturer: Mangrove Jack's

A small 5-liter party keg that fits perfectly in your refrigerator and is easy to bring to a party. The keg is used with a separate tap with carbonation capsule. The beer shelf life is several weeks. Volume: 5 liters Height: 25 cm Diameter: 17 cm Can be reused.

A small 5-liter party keg that fits perfectly in your refrigerator and is easy to bring to a party. If you introduse air into the keg, the beer should be consumed within a few days from the keg is opened. The keg can also be used with a separate tap with carbonation capsule. If you serve the beer without introducing beer with the built-in tap, the beer may hold for several weeks. Volume: 5 liters Height: 25 cm Diameter: 17 cm Can be reused.Add rubber plug, se below.

Mini Keg PET 8 L including cap and handle is a very light and convenient way of storing and transporting beer compared heavy and bulky steel kegs such as Cornelius kegs. It is a very inexpensive way of serving draft beer as well as bringing beer to any type of event. Since it can be washed and reused, it is also a cheap way to store your beer.With the special polymer blend the oxygen barrier is improved by 3 times compared to normal PET. Beer can easily be stored up to 6 months in these kegs.Do not exceed 4 Bar / 65psiFor dispensing we recommend the specially designed tapping head.

This tapping head with dip tube filter (pressure kit) fits the 4 and 8 L PET mini kegs.  The tapping head is designed to fit standard ball lock disconnects making it an inexpensive solution for draft beer and bringing beer anywhere. The tapping head kit includes beer and gas posts, 2,5 bar pressure relief valve and a dip tube including filter. Ideal for any type of drink you want to serve directly from the keg.NOTE: PET Mini Keg sold seperately - Not Included.

Cap where a Pressure Relief Valve can be mounted. The cap has a standard PET bottle thread. Please Note: Never exceed the pressure capabilities of your container. Pressure Relief Valves are not spunding valves!