Brewly

Special yeast strain for the production of hazy ales such as pale ales, IPAs, DIPAs and TIPAs. With these hop forward beers in mind, the strain offers creamy, juicy mouthfeel with some residual sweetness, tropical fruity esters and low flucculation.- Alcohol Tolerance: High (11%)- Temperature Range: 15-23°C (59-74°F)- Attenuation: Medium (74-79%)- Flocculation: Low- Net Weight: 12g (0.42oz) - Made in EU.- GMO-Free: Yes- Storage: In fridge (cool & dry)- Packed in a protective atmosphere.UseSprinkle the yeast directly in up to 23 liters (6 gallons) of wort. Alternatively, rehydrate the yeast. Aerate. If Original Gravity is above 1.065 (65 °Öchsle), use 2 packs for 23L.

Yeast strain specifically selected from a famous region in France for its perfect character for cider, champagne and fruit wine fermentation. The strain has very high alcohol tolerance, great flocculation and the ability to ferment at low temperatures. The pack contains 6g active dry yeast for up to 30L of cider or wine.- Alcohol Tolerance: Very High (19%)- Temperature Range: 9-31°C (48-88°F)- Flocculation: High- Attenuation: Very High- Net Weight: 6g (0.21oz) - Packed in a protective atmosphere.- Made in EU.- GMO-Free: Yes- Storage: In fridge (cool & dry)UseSprinkle the yeast directly in up to 30 liters (8 gallons) of juice/must. Alternatively, rehydrate the yeast.

Spare part. Brewly ACS Can Adaptor 500ml Standard. Adaptor for using the Brewly ACS Can Sealer with 500ml Standard cans. This is the main adaptor that fits directly on the turntable.

spare part. Stopper for the telescopic malt basket pipe so malt or grains cannot enter it during mashing in.

Brewly PCB-Board Kit (power+display+sensor). Spare parts. NOTE: Only works with V3 40/70L breweries.

Graduated volume tube in polycarbonate that fits the Brewly 40L V1 & V2 brewery. Brewly 40L V1 & V2 Volume Sight Tube

Brewly Stainless Ball valve barbed

Updated gasket: Brewly Silicone Gasket for Conical Fermenter Lid

Fine-mesh bottom filter to avoid larger particles in the wort during mashing. Also fits Brewolutions Brewster.diameter 355mm

Brewly ACS Can Adaptor 250ml Sleek. Adaptor for using the Brewly ACS Can Sealer with 250ml Sleek cans.PLEASE NOTE: This adaptor does NOT fit the 250ml SLIM can, only 250ml SLEEK. The SLEEK can is 115mm high and 58mm diameter while the 250ml SLIM is 135mm high and 50mm diameter.

Brewly MP-15RN Magnetic pump 10W, IP44. 5/8" (16mm) input and 5/8" (16mm) output (points upward), not threaded.

Brewly Lid Seal for CF 30L Fermenter - Spare part

Brewly Flexible Recirculating Arm 40-70L. Spare Part.

Brewly Corker Twin Lever - Wine Bottle Corker. Corking wine bottles doesn't get any easier. This is a superbly made item. Put in a cork - Put the twin level corker on the bottle and press down. Job done! Built to last, you'll past this down to your kids.

Brewly Steel Capper for standard 26mm crown bottle caps. Capping bottles doesn't get any easier. This is a superbly made item. Built to last, you'll past this down to your kids.

Brewly O-ring Kit for 40/70L Brewery - Spare Part. (1 pc of all o-rings used)

Brewly Volume Pipe 70L - Spare Part

Brewly Volume Pipe 40L - Spare Part

Brewly Chiller 13m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Includes Quick Connectors (3/4-inch) that are Gardena system-compatible (as in image). Suitable for breweries, pots and kettles up to 70L. Cooling Spiral length: 13 metersSpiral diameter: ca 25 cmSpiral height: ca 35 cmTotal height: ca 52 cm

Brewly Chiller 8,8m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Includes Quick Connectors (3/4-inch) that are Gardena system-compatible.Suitable for breweries, pots and kettles up to 40L.Spiral diameter: ca 25 cmSpiral height: ca 25 cmTotal height: ca 39 cmCooling spiral length: 8,8 meters.

Brewly Blue Rubber for Tap. Spare part.

Insulation jacket for the Brewly 30L Conical Fermenter (both versions, CF & CCF). Material: 5 mm neoprene foam.

The Brewly Hop Spider keeps hops together during the boil, separated from the wort. It can be used on most breweries and kettles. This spider can be used for any kind of hops, including hop pellets.Brewly SS800 Hop SpiderDiameter: 15 cm Height: 35,5 cm Material: 800 micron 304 grade stainless steel mesh, with stainless steel support band and single hook

Ferment your beer in stainless conical fermeters just like in professional breweries. Rotary racking arm with dip tube provides very good extraction of beer from above the cone. Perfect for batch sizes up to 30L, optimally 20-25L.Brewly CF 30L Conical Fermenter- Material: Polished stainless steel (ANSI 304)- Polished seamless inside for maximum sanitary conditions- 30L capacity (32L to edge)- Thermometer 0-40C (32-104C) with internal thermowell for the sensor.- Mini valve 3/8" with rotary racking arm with dip tube provides very good extraction of beer from above the cone for bottling or transfer to keg.- Dump valve on conical bottom with 1/2" stainless steel valve, perfect for yeast dumping and easy cleaning.- Internal volume scale up to 30L- 2 steady stainless steel handles- 3 adjustable legs with rubber feet- Airlock with rubber plug- Stainless lid with lock med heavy-duty silicone seal- Diameter: 33,5cm- Height without airlock: 59 cm, adjustable up to 66cm- Height with airlock: 69 cm, adjustable up to76cm- Multiple fermenters can be stacked on top of eachother- Instructions manual in English

Stainless Whirlpool Arm with CAM-lock connector, makes it possible to create a whirlpool in the wort after the boil which increases volume efficiency and speeds up the cooling of the wort. Black neoprene handle.Brewly Whirlpool Arm CAM-lockLength: 40cm, usefull length 35cm. Fits: Brewly 40L brewery or similarMaterial: Stainless Steel 304.

Brewly 70L Brewery Kit is a affordable kit consisting of Brewly 70L Brewery (chiller, hop spider, whirlpool, mash paddle) & Brewly 40L sparge water heater.For more information, please see each product page.NOTE: Video shows Brewly V2 brewery.

Brewly 40L Brewery Kit 1 is a affordable kit consisting of Brewly 40L V3 Brewery & Brewly 20L Sparge water heater.For specifications, please see the product pages.

Heat insulation for the Brewly 70L V2 brewery. Provides faster heating, more vigorous boil and reduces energy consumption. Material: 5 mm neoprene foam.

Heat insulation for the Brewly BWH30L brewery & water heater. Provides faster heating, more vigorous boil and reduces energy consumption. Material: 5 mm neoprene foam.

Heavy duty stainless steel mash paddle from Brewly. Length 60cm.

Magnetic Pump MP-10RN, spare part for Brewly Breweries, also fits other breweries. Up to 12L/min. Very quiet, high quality, powerful magnetic pump that can handle wort/water up to 100°C, however its not recommended under sustained periods. Perfect for recirkulating wort and transfer of wort/drikning water. Standard 14mm inlet/outlet.Do not run the pump dry.Specifications Brewly Magnetic Pump MP-10RNCapacity: max 12 L/min (60Hz)Head: max 2,1 meters (60Hz)Power rating: 6WVoltage: 220-240V (50-60Hz)Protection: IP44Tube Interface Inlet: 14 mmTube Interface Outlet: 14 mmNote: Do not run the pump dry

Brewly 20L Sparge Water Heater is a 2000W thermostat controlled heater/boiler for quick heating of sparge water - HLT (Hot Liquor Tank). This sparge water heater has the same ball valve tap as the Brewly Breweries, a stainless steel quality product.Brewly 20L Sparge Water Heater (SWH20):- High quality 304 grade stainless steel construction (matte or glossy)- Stainless steel lid- Stainless steel ball valve outlet 1/2" (fits 12mm hose inner diameter)- Heavy duty handles for safe lifting- 20L total capacity up to brim- Internal volume scale up to 17L- Concealed 2000W electric heating element for easy cleaning- Thermostat temperature control, +/- 1°C- Thermostat setting 30-110°C (110°C for max output)- 2500 W heating element for quick heating- Automatic overtemp cutout and overheat protection for max safety- 230V power supply. EU-version power cord (UK power cord NOT included).- Height: 50 cm (without lid)- Diameter: 27 cm (without tap and handles)

Ferment your beer in stainless conical fermeters just like in professional breweries. Built-in stainless cooling spiral chiller with gardena-type connectors for easy connections to a cooling medium of your choice. Build-in thermowell for external temperature sensor probe, for example from a thermostat controlling a pump. Rotary racking arm with dip tube provides very good extraction of beer from above the cone. Perfect for batch sizes up to 30L, optimally 20-25L.Brewly CCF 30L Conical Cooling Fermenter with Chiller- Material: Polished stainless steel (ANSI 304)- Polished seamless inside for maximum sanitary conditions- 30L capacity (32L to edge)- 4,7m built-in stainless cooling spiral chiller with gardena-type connectors for easy connections to a cooling medium of your choice.- 30cm stainless thermowell for external temperature sensor probe, for example from a thermostat controlling a pump (like Brewly AC-211/TC-320 universal thermostats).- Thermometer 0-40C (32-104C) with internal thermowell for the sensor.- Mini valve 3/8" provides very good extraction of beer from above the cone for bottling or transfer to keg.- Dump valve on conical bottom with 1/2" stainless steel valve, perfect for yeast dumping and easy cleaning.- Internal volume scale up to 30L- 2 steady stainless steel handles- 3 adjustable legs with rubber feet- Airlock with rubber plug- Stainless lid with lock med heavy-duty silicone seal- Diameter: 33,5cm- Height without airlock: 59 cm, adjustable up to 66cm- Height with airlock: 69 cm, adjustable up to76cm- Multiple fermenters can be stacked on top of eachother- Instructions manual in English

Brewly 70L V3 is an efficient, compact half-automatic brewery for up to 60L batches with Whirlpool, Hop Spider, Wort Chiller with gardena-type connectors and mesh screen bottom hop filter.News:- Brewly SS500 Hop Spider is included- Brewly Stainless Mash Paddle 60cm is included- New improved malt basket allows more open wort flow to reduce risk of stuck mash.- New large surface heating element reduce risk of burn-ins.The Brewly brewery opens up a world of possibilities to brew great craft beer with friends and family, and experience the pleasure to make beer at home that tastes as good as it does from a professional brewery.Mashing, lautering/straining, boiling and cooling takes place in the same pot. The mash is pumped around and heated according to the RIMS method. The Digital Controller provides simplicity in entering temperatures, times and power for both mashing and boil. Up to 9 mash steps and 9 hop/spice steps per recipe, and the memory can store up to 9 recipies.The malt is placed in a stainless malt basket with a perforated insert. The malt basket can easily be lifted in several steps for lautering/straining, and the insert can be adjusted seamlessly to fit the malt bill, thanks to a telescopic overflow-pipe.A polycarbonate sight glass lets you see the wort/beer volume up to 60L, and there is also a volume scale inside.A stainless Whirlpool tube is also included, making it possible to create a whirlpool in the wort which increases volume efficiency and speeds up the cooling of the wort.Note: Effective brewing volume is 20-60 liters.Brewly 70L Brewery with Chiller, Hop Spider, Paddle & Whirlpool- Material: Polished stainless steel (AISI 304)- Chiller: 13m stainless Cooling Spiral with gardena-type fittnings for easy connections- NEW! Brewly SS500 Hop Spider (500 mesh)- NEW! Brewly Stainless Mash Paddle 60cm- Whirlpool: Stainless Whirlpool tube with CAM-lock-connector- Adjustable flexible recirculation tube with CAM-lock-connector- Bottom filter: Mesh-screen bottom filter for efficient separation of hops from the wort.- Brewing volume: 65 liters (recommended max)- Total volume: 75 liters- Power: 3500 W, adjustable in 100 W steps. 16A fuse is needed. The heating element with new larger surface is placed below the bottom to avoid wort caramelization.- Malt basket: Can easily be lifted in several steps for lautering/straining, and the insert can be adjusted seamlessly to fit the malt bill, thanks to a telescopic overflow-pipe. A Grainstopper avoids malt dropping through during mash-in. Max recommended malt weight is 15 kg.- Digital Controller with memory to store up to 9 recipies with up to 9 mash steps and 9 hop/spice steps each. Choose between Automatic Mode and Manual Mode with alarms and reminders.- Temperature range 25°C to 100°C, adjustable in 0,1°C steps.- Temperature control up to 100°C, with +-1°C accuracy.- Powerful magnetic centrifugal pump with seperate control. Max flow 12 liters per minute.- Tap 1/2" (fits 12mm inner diameter hose)- Height: 69 cm (without lid and recirculation tube)- Diameter: 40 cm (without handles and tap)- Weight: 12 kg- EU-power plug (UK power plug not included)- 220-240V 50/60Hz- Instructions Manual in EnglishMash water calculation:mash water in liters = (amount malt in kilos * 2,5) + 10L.Note: 2,5 is the ratio between water and malt, ie how thick the mash is going to be. This ratio can be varied between approx 2,2-3. 10L is the volume of water below the malt basket inside the brewery.Example: For a 20L recipe with 6kg malt the mash water calculation is as following: 6*2,5+10 = 25L.Sparging: For a 20L recipe, sparge with 78-degree C water up to the 25L mark, and then start the boil (you may start heating the wort while sparging to save time).

Brewly 40L is an efficient, compact half-automatic brewery with Whirlpool, Hop Spider Wort Chiller with gardena-type connectors and mesh screen bottom hop filter.News:- Now a Brewly SS500 Hop Spider is included.- Now a Brewly Stainless Mash Paddle 60cm is included.- New open typ e malt basket for optimized wort flow.- A new heating element for reduced risk of burn-ins.The Brewly brewery opens up a world of possibilities to brew great craft beer with friends and family, and experience the pleasure to make beer at home that tastes as good as it does from a professional brewery.Mashing, lautering/straining, boiling and cooling takes place in the same pot. The mash is pumped around and heated according to the RIMS method. The Digital Controller provides simplicity in entering temperatures, times and power for both mashing and boil. Up to 9 mash steps and 9 hop/spice steps per recipe, and the memory can store up to 9 recipies.The malt is placed in a stainless malt basket with a perforated insert. The malt basket can easily be lifted in several steps for lautering/straining, and the insert can be adjusted seamlessly to fit the malt bill, thanks to a telescopic overflow-pipe.A polycarbonate sight glass lets you see the wort/beer volume up to 40L, and there is also a volume scale inside.A stainless Whirlpool tube is also included, making it possible to create a whirlpool in the wort which increases volume efficiency and speeds up the cooling of the wort.Brewly 40L Brewery with Chiller & Whirlpool- Material: Polished stainless steel (AISI 304)- Chiller: 8,8m stainless Cooling Spiral with gardena-type fittnings for easy connections- NEW! Brewly Hop Spider SS500 (500 mesh)- NEW! Brewly Mash Paddle 60cm- Whirlpool: Stainless Whirlpool tube with CAM-lock-connector- Adjustable flexible recirculation tube with CAM-lock-connector- Bottom filter: Mesh-screen bottom filter for efficient separation of hops from the wort.- Brewing volume: 40 liters- Total volume: 45 liters- Power: 2500 W, adjustable in 100 W steps. 16A fuse is recommended. The heating element is placed below the bottom to avoid wort caramelization.- Malt basket: Can easily be lifted in several steps for lautering/straining, and the insert can be adjusted seamlessly to fit the malt bill, thanks to a telescopic overflow-pipe. A Grainstopper avoids malt dropping through during mash-in. Max recommended malt weight is 10 kg.- Digital Controller with memory to store up to 9 recipies with up to 9 mash steps and 9 hop/spice steps each. Choose between Automatic Mode and Manual Mode with alarms and reminders.- Temperature range 25°C to 100°C, adjustable in 0,1°C steps.- Temperature control up to 100°C, with +-1°C accuracy.- Powerful magnetic centrifugal pump with seperate control. Max flow 12 liters per minute.- Tap 1/2" (fits 12mm inner diameter hose)- Height: 57 cm (without lid and recirculation tube)- Diameter: 40 cm (without handles and tap)- Weight: 10 kg- EU-power plug (UK power plug not included)- 220-240V 50/60Hz- Instructions Manual in EnglishMash water calculation:mash water in liters = (amount malt in kilos * 2,5) + 10L.Note: 2,5 is the ratio between water and malt, ie how thick the mash is going to be. This ratio can be varied between approx 2,2-3. 10L is the volume of water below the malt basket inside the brewery.Example: For a 20L recipe with 6kg malt the mash water calculation is as following: 6*2,5+10 = 25L.Sparging: For a 20L recipe, sparge with 78-degree C water up to the 25L mark, and then start the boil (you may start heating the wort while sparging to save time).

Brewly TC-320 Digital Universal Thermostat. EU-version power cord (UK power cord not included).

English ale yeast used by many commercial breweries - perfect for a large variety of ale styles such as ESB, pale ale, IPA, porter and stout. It features excellent, quick fermentation capacity and produces classic, slightly estery beers with aromatic, fruity aroma. The pack contains 12g active dry yeast for up to 23L of beer.- Alcohol Tolerance: High (12%)- Temperature Range: 17-23°C (63-74°F)- Attenuation: High 80%- Flocculation: High- Net Weight: 12g (0.42oz)- GMO-Free: Yes- Storage: In fridge (cool & dry)- Packed in a protective atmosphere.- Made in EU.UseSprinkle the yeast directly in up to 23 liters (6 gallons) of wort. Alternatively, rehydrate the yeast. Aerate. If Original Gravity is above 1.065 (65 °Öchsle), use 2 packs for 23L.

Famous German bottom fermenting lager strain originating from Weihenstephan. Gives clean flavors and highly drinkable beers with excellent balance between floral and fruity aromas - perfect for styles such as lagers, pilsners and california commons. The pack contains 12g active dry yeast for up to 23L of beer.- Alcohol Tolerance: High (10%)- Temperature Range: 9-22°C (48-72°F)- Attenuation: Very High 83%- Flocculation: High- Net Weight: 12g (0.42oz)- GMO-Free: Yes- Storage: In fridge (cool & dry)- Packed in a protective atmosphere.- Made in EU.UseSprinkle the yeast directly in up to 23 liters (6 gallons) of wort. Aerate. If fermentation temperature is 12°C use 2 packs for 23L, if 9°C use 3 packs.

American ale yeast used by many commercial breweries - perfect for a large variety of ale styles such as pale ale, IPA, porter and stout. It features excellent, quick fermentation capacity and produces very crisp, clean and balanced beers with low diacetyl. The pack contains 12g active dry yeast for up to 23L of beer.- Alcohol Tolerance: High (12%)- Temperature Range: 15-22°C (59-72°F)- Attenuation: High 80%- Flocculation: High- Net Weight: 12g (0.42oz)- GMO-Free: Yes- Storage: In fridge (cool & dry)- Packed in a protective atmosphere.- Made in EU.UseSprinkle the yeast directly in up to 23 liters (6 gallons) of wort. Alternatively, rehydrate the yeast. Aerate. If Original Gravity is above 1.065 (65 °Öchsle), use 2 packs for 23L.

Refractometer with Automatic Temperature Correction (ATC) and dual scales: 0-32°Brix and up to SG 1.130.

Brewly ACS Can Adaptors 3-pack 330ml Standard, 440ml Standard & 330ml Sleek. Work with all Brewly ACS canning machines.

Spare part. Brewly L-pipe for Brewly Brewery 40L and 70L Pump Inlet. Material is stainless steel. Keeps hop and malt debris at the bottom of the brewery from entering the pump inlet. May also fit Brewolution BB40 and BB70 which has similar construction.The pipe inlet is ca 40mm above the brewery's bottom. Total height avobe bottom is ca 45mm. The pipe length horizontally is ca 110mm.

Note: fits only V3. Glass cap that fits both 40L and 70L Brewly V3 breweries.

Tap made in 304 stainless steel that fits most breweries. Rubber covered handle with auto-lock function. 1/2" thread with stainless 1/2" nut and silicone seal. 13mm (1/2") barb at the opening (fits 1/2" hose).

The Brewly Hop Spider keeps hops together during the boil, separated from the wort. It can be used on most breweries and kettles. This spider can be used for any kind of hops, including hop pellets.Brewly SS500 Hop SpiderDiameter: 15 cm Height: 35,5 cm Material: 500 micron 304 grade stainless steel mesh, with stainless steel support band and single hook