Equipment

Crown Caps 30-pack Black

Screw Cap for 5L plastic container 5L, white or black. Note: Container/can is not included.

Better Brew Airlock Straight, fits in standard grommets for standard fermenter buckets. An essential piece of homebrew kit. This Bubbler Airlocks fits into drilled bungs and grommets. Designed specifically for homebrew.It lets the CO² pressure out without letting contamination back in.Just partially fill with water and you're done.Rubber seal for air lock sold separately

Graded and food-grade HDPE plastic can of the highest quality. Neutral translucent colour. Time and temperature and storage while in contact with the food:- Any food contact at frozen and refrigerated conditions.- Any long-term storage at room temperature or below, including heating up to 70 °C for up to 2 hours, or heating up to 100 °C for up to 15 minutes.- Any contact conditions that include heating up to 70 °C for up to 2 hours, or up to 100 °C for up to 15 minutes, which are not followed by long term room or refrigerated temperature storage. Plastic container 5L incl. CapVolume: 5 liters with M40 white or black screw cap.Material: polyethylene (HDPE)Width: 12 cmDepth: 18 cmHeight: 30 cm

Spiral fermenter air lock with red or yellow cap. 10mm diameter.Rubber seal for air lock sold separately

Lactic Acid 10ml

Bottle labels in 40-pack on A4 sheets. 8 white paper labels with glue per A4. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable by soaking the glass bottles in hot water for 15 minutes.Link to Word templateDownload the template for Word hereUse the Word template to design your labels.Link to PDF templateDownload hereUse this template to design your labels in for example Adobe Photoshop or Illustrator.Label MeasurementsWidth: 105 mmHeight: 74 mmNote that they are harder to remove from PET- and plastic bottles. There is noi prnt on the labels, they are white and blank.

Muslin bag 1-pack

Fermenter tap with barb (8-12mm) with nut and rubber gasket. Fits holes 25-26mm diameter. Recommended silicone hose inner diameter for the nipple is 8-10mm.

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume250 ml / 8.5 fl.oz

Bottle 100cl Patent Cap

Rubber Seal for Airlock that fits 15L and 30L fermenters.

Spiral fermenter air lock with red or yellow cap. 10mm diameter.Rubber seal for air lock sold separately

Thermometer LCD 2-36 degrees Celcius. Self-adhesive. Perfect for the fermenter. Size: 21x148 mm.

Measuring Cylinder Plastic 100ml, height about 27cm.

Hydrometer for beer. 0-120 °Oechsle scale. The appearance of the meter may vary. Contains no farmful substances, only glas and iron.

The Original. VWP can be used to clean and sanitize all types of home brewing equipment. 100g is enough for up to 110L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.This sterliser comes in a sturdy tub and contains the steriliser in a white powder, its as simple as adding a level teaspoon to your primary fermentation bucket and filling it with some water, add all your equipment to the bucket and leave to sit in the solution for approx 15 minutes, rinse and that's it ready for use

Fermenter made of food grade plastic. Lid and rubber seal for air lock are included. Graded to 12L, 15L maximum.MeansurementsHeight: 32 cmDiameter: 30 cmNote: Fermenter air lock is not included.

Better Brew Wine Corks 22x38mm 30-pack. A cork should be slightly larger than the inside dimension of the bottle. This is to protect the wine from oxygen supply and bacterial infestation during storage, which should be done with a horizontal bottle, to keep the cork moist. This cork should not be heated in water. Use a cork device. A shrink cap gives an elegant and professional look.Fits all our wine bottles.

Better Brew Hydrometer with 3 scales.

3-piece airlock in transparent plastic that fits ordinary plastic fermenters as well as FermZilla and Brewly fermenters. Easy to clean. Fits 9mm holes.Rubber seal for air lock sold separately

Affordable disposable plastic pipette with graduation 0,5-3ml.

Better Brew Airlock 3 bubbles, fits in standard grommets for standard fermenter buckets. An essential piece of homebrew kit. This Bubbler Airlocks fits into drilled bungs and grommets. Designed specifically for homebrew.It lets the CO² pressure out without letting contamination back in.Just partially fill with water and you're done.Rubber seal for air lock sold separately

Fermenter 30L with tap-hole and lidAir lock, handle and tap sold separately

Bag-In-Box Bag 3L with Tap (T-tap). Sterile polyethylene high barrier plastic. For both hot and cold filling. Maximum recommended fill temperature is 90 degrees Celsius (194 °F). BPA-free. The bag is filled through the spout and closed with the tap.Dimensions: 245 × 315 mm.

Fermenter 15L with lid and tap hole

Fermenter 30L with lid and tap with barb.Height: 44cmDiameter: 37cm

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming.Inside diameter: 1/8" (3.2 mm)Outside diameter: 3/16" (4.8 mm)Price per meter. If more than one meter is ordered, its delivered in one piece.

Pump Auto siphon 33cm with 1,5m tube with clip. NOTE: No holder is included.

Bottles 33cl 28-pack Longneck

Muntons Carbonation Drops 160g

Fermenter 15L with lid and tap with barb

Fermenter made of food grade plastic. Lid and rubber seal for air lock are included. Graded to 25L, 30L maximum.MeansurementsHeight: 44 cmDiameter: 37 cmNote: Fermenter air lock and handle is not included.

Wine bottles 75cl 12-pack brown bottles, the brown colour is the best for avoiding oxidation. New bottles. For 22mm wine corks.

The Measuring Kit comprises of a Hydrometer and a Measuring Cylinder 100ml.

Bottle filler 33cm with 1m tube for tap

Better Brew Caps. 26mm crown caps.

Mangrove Jack's Carbonation Drops 200g

Air Lock Compact Mini 30L in transparent plastic that fits ordinary plastic fermenters as well as FermZilla and Brewly fermenters. Very compact - adds just 45mm. Easy to clean. Fits 9mm holes. DimensionsTotalt height: 90mmAir lock part height: 45mm (if the air lock is pressed down completely it adds just 45mm)Diameter: 35mmRubber seal for air lock sold separately

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming. Inside diameter: 1/8" (3.2 mm)Outside diameter: 3/16" (4.8 mm) Price per meter. If more than one meter is ordered, its delivered in one piece.

The Original. VWP can be used to clean and sanitize all types of home brewing equipment. 400g is enough for up to 440L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.This sterliser comes in a sturdy tub and contains the steriliser in a white powder, its as simple as adding a level teaspoon to your primary fermentation bucket and filling it with some water, add all your equipment to the bucket and leave to sit in the solution for approx 15 minutes, rinse and that's it ready for use

Kelly Hand capper with magnet to hold the cap, even bottles with a low grip edge. This capping device fits most bottles for standard 26mm crown caps. Does not leave an imprint on the cap. It is very stable and works well with all the most common types of bottles.

Fluidfit® HCF-UNF push-fit connection connection with female 7/16" thread UNF (1/4" FFL/MFL thread) - connector adaptor for threaded ball disconnects. For 3/8" hose. UNF 7/16" and 3/8" pushfit.

The Measuring Kit comprises of a Hydrometer 3-scale and a Measuring Cylinder 100ml.

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume1000 ml / 34 fl.oz

Self-closing quick disconnect for ball lock cornelius kegs. White/grey coupling that fits on the gas post. Threads: 1/4" MFL (corresponds to 7/16" UNF).