Equipment

Complete silicone tube kit for connecting the tubes and pump at the bottom. SPARE PARTS

Duotight Valve Connector 8mm (5/16") pushfit.

Neoprene Jackets with recirculation arm cover for stable temperatures and heat retention. 8 mm thick neoprene. Must-buy if you brew where it is cold/windy.

Neoprene Jackets with recirculation arm cover for stable temperatures and heat retention. 8 mm thick neoprene. Must-buy if you brew where it is cold/windy.

Upgrade your G30 Brewing System with the G30 Hop Plate, a purpose-built false bottom style hop plate filter for use with all G30 Brewing Systems. Install alongside the system's current filter for increased efficiency in hop filtration.How to Use:- Install the G30 Filter (this is the hop filter included with the G30) as per the instructions included with the G30 Brewing System.- Install the G30 Hop Plate by placing the plate feet down into the boiler over the top of the G30 Filter, so the feet of the hop plate rest flat on the base of the boiler. Features:- Sleek, high-quality 304 grade stainless steel construction- Easy to clean- Full body false bottom style filter for even better hop filtration- Designed specifically for use with the G30 Brewing SystemSpecifications- Stainless steel construction: (0.9 mm Thickness)- Outer diameter (Width): 29.5 cm Height: 5.1 cm- Perforation diameter: 1.8 mmNote: Some users may experience a slight reduction in boil vigour and slight increases in heating time.Caution: Post-boil hop matter will retain heat. Always use thermally insulated gloves when removing the hop plate post boil.

Brewly Bottom Grain Basket Plate for 40L & 70L Brewery. Spare part. Also fits Brewolutions Brewster.

Brewly Top Grain Basket Plate for 40L & 70L Brewery. Spare part. Also fits Brewolutions Brewster.

Brewly Large Pump Hose Adaptor for 40L & 70L Brewery. Silicone. Spare part.

Brewly Small Pump Hose Adaptor for 40L & 70L Brewery. Silicone. Spare part.

Push Fit Duotight Elbow Female-Female 9,5mm (3/8"). Beer or Gas. Kegland Duotight.

Push Fit Duotight Elbow 9,5mm (3/8") Female to Male 9,5mm (3/8"). Kegland Duotight.

Push Fit Duotight Elbow Female-Female 8mm (5/16"). Liquid or Gas. Duotight.

Grainfather 2" Tri-clamp Gasket for Conical FermenterSpare Part.

Better Brew Glass Demijohn 5L (about 1 gallon). Perfect for wine, cider, mead, kombucha and beer. Ca 32mm hole/opening for bung.Included:- 1st Better Brew Demijohn 5L- 1st Bung 35/29mm in cork with hole for air lock- 1st Bung 35/29mm in cork without hole (sealed) We recommend a silicone bung 37/28mm instead of the included cork bungs.

Mangrove Jack - Lid Seal for Stainless Steel FermenterSpare Part.

Conicus Pro 55L is a stainless steel conical fermenter that can handle max pressures up to 2 bars (1 bar working pressure). Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. With a unique 3” sight glass, allowing brewers to observe the beer, level, and fermentation process like never before.Conicus Pro by BrewolutionHomebrewing enthusiasts, meet the Conicus Pro! The essence of innovation and functionality in the world of homebrewing and stainless-steel conical fermenters or Unitanks for short. This is not just another pressurised conical fermenter; it is the realisation of every homebrewer's ultimate dream, offered at a price range accessible to all. Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. Conicus Pro by Brewolution.All the ports you needConicus Pro comes with all the features and ports you need. Including a 1.5” tri-clamp stainless-steel butterfly sample valve and a 2” tri-clamp stainless-steel butterfly dump valve. It has an operating pressure of 1 bar. The Conicus Pro stands as a testament to advanced fermenting technology.3-inch Sight GlassThe unique 3” sight glass is a game-changer, allowing brewers to observe the beer, level, and fermentation process like never before. Additionally, the sight glass is designed for the future with focus and features for digital hydrometers. The sight glass lets transmission from devices like the Graviator or other digital hydrometers escape, ensuring data flow and precise monitoring of your brew.CIP CleaningThe fantastic feature of the Conicus Pro is its capability for CIP (Clean-In-Place) cleaning. This method is not only easy and quick but also incredibly effective, guaranteeing comprehensive cleaning and sanitation.Temperature ControlStainless steel allows for effective temperature control. The Conicus Pro fits inside the Ferminator. With the Ferminator you can set the desired temperature and maintain this accurate temperature stable during the fermentation. It can also be easily integrated with an insulated jackets and coil chiller or other temperature control systems, providing stability during fermentation.In the box1x Conicus Pro Stainless-steel Fermenter1x 1,5” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp elbow 90°1x 3” Sight glass incl. 2 x gasket5x 1,5” tri-clamp blind cap1x 2” tri-clamp blind cap1x 4” tri-clamp blind cap5x 1,5” tri-clamp gasket4x 2” tri-clamp gasket1x 4” tri-clamp gasket5x 1,5” tri-clamp3x 2” tri-clamp1x 4” tri-clamp1x Airlock, 3-Piece1x Silicone Bung1x ManualSpecifications- Max volume: 57 L.- Max brew volume: 50-55* L. - Min brew volume: 20-25* L.- Working pressure 1 bar, max pressure 2 bar - Matt stainless-steel finish on the outside.- Super smooth stainless-steel finish on the inside.- Liter and US gallon scale on the inside.- 3” Sight glass with liter and US gallon scale- Stainless steel AISI 304- Lid: 1 x 4” port, 2 x 1,5” ports, 1 x 2” port- Body: 4 x 1,5” ports- 1,5” tri-clamp stainless-steel butterfly sample valve- 2” tri-clamp stainless-steel butterfly dump valve- 2 stainless steel handles- Airlock, 3-piece, and silicone bung incl.- Tree fixed legsSize & WeightHeight: 108,5 cm (115 cm with airlock)Diameter at the top: 42 cmWeight Gross: 21,5 kgWeight Net: 16 kg- See product image gallery for dimensions

The jacket can retain the heat generated during the fermentation and improve the performance of the fermenter, even when you are fermenting in a cold room.The jacket is also a must if you have the lid with spiral cooler. The jacket can help with an even more controlled and effective temperature regulating inside the fermenter.Insulation thickness: 6 mm.Material: durable and rugged styrene butadiene rubber.

The jacket can retain the heat generated during the fermentation and improve the performance of the fermenter, even when you are fermenting in a cold room.The jacket is also a must if you have the lid with spiral cooler. The jacket can help with an even more controlled and effective temperature regulating inside the fermenter.Insulation thickness: 6 mm.Material: durable and rugged styrene butadiene rubber.

The 4” Lid with Coil Chiller is a exceptional brewing accessory designed for use with water, glycol chiller or similar systems. This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.  Perfect for Conicus Pro 55L. The core of this product is its stainless steel chilling coil. Immersed directly in your fermenting beer, it works efficiently to maintain ideal fermentation temperatures. The coil is crafted from high-quality stainless steel and is easy to clean, ensuring durability and reliability in your brewing process. Its length and width are thoughtfully designed to fit perfectly within the Conicus Pro 4" opening or similar systems.Installing the chilling coil is straightforward. It involves fitting the coil into the 4" opening and close it with the Tri-Clamp. For cooling, you will need an insulated tubing kit (either the one provided or your own), which connects the coil to your glycol chiller. This setup is vital for precise temperature control during fermentation, especially crucial when brewing lagers, which require colder fermenting temperatures.The 4" Lid with Coil Chiller also offers an efficient solution for cold crashing your beer. Cold crashing is a technique used to improve beer clarity and mouthfeel by bringing the beer to a low temperature, causing residual yeast and other particles to settle at the bottom of the fermenter.You can easily connect water, glycol chiller or similar systems to the inlet and outlet to the two male connections.We recomend bying the Conicus Pro 30 Insulation jacket with this Coil ChillerFeatures:521 mm long stainless-steel spiral cooler4" LidLid mounted two male connections for water or glycol chillerWith beer and Co2 postAISI 304 stainless-steelEasy to clean.Intergrated in the lid is a beer and CO2 post for carbonating and dispensing the beer. These posts are smart integral parts of the lid: one for adding gas (CO2) and the other for dispensing the liquid (beer).If you want to control the temperature during the fermentation the Conicus Pro can be mounted with this optional lid with a build-in cooling coil. This is a very simple, but effective way of controlling the temperature inside the fermenter.We recomend using the Ferminator for a more easy, effective and precise temperature regulating.This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.

The 4” Lid with Coil Chiller is a exceptional brewing accessory designed for use with water, glycol chiller or similar systems. This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc. The core of this product is its stainless steel chilling coil. Immersed directly in your fermenting beer, it works efficiently to maintain ideal fermentation temperatures. The coil is crafted from high-quality stainless steel and is easy to clean, ensuring durability and reliability in your brewing process. Its length and width are thoughtfully designed to fit perfectly within the Conicus Pro 4" opening or similar systems.Installing the chilling coil is straightforward. It involves fitting the coil into the 4" opening and close it with the Tri-Clamp. For cooling, you will need an insulated tubing kit (either the one provided or your own), which connects the coil to your glycol chiller. This setup is vital for precise temperature control during fermentation, especially crucial when brewing lagers, which require colder fermenting temperatures.The 4" Lid with Coil Chiller also offers an efficient solution for cold crashing your beer. Cold crashing is a technique used to improve beer clarity and mouthfeel by bringing the beer to a low temperature, causing residual yeast and other particles to settle at the bottom of the fermenter.You can easily connect water, glycol chiller or similar systems to the inlet and outlet to the two male connections.We recomend bying the Conicus Pro 30 Insulation jacket with this Coil ChillerFeatures:338 mm long stainless-steel spiral cooler4" LidLid mounted two male connections for water or glycol chillerWith beer and Co2 postAISI 304 stainless-steelEasy to clean.Intergrated in the lid is a beer and CO2 post for carbonating and dispensing the beer. These posts are smart integral parts of the lid: one for adding gas (CO2) and the other for dispensing the liquid (beer).If you want to control the temperature during the fermentation the Conicus Pro can be mounted with this optional lid with a build-in cooling coil. This is a very simple, but effective way of controlling the temperature inside the fermenter.We recomend using the Ferminator for a more easy, effective and precise temperature regulating.This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.

This is a stainless-steel tri-clamp sample valve with a rotating rack arm mounted on a 3/8" tap with 13 mm barb. It is easy to mount.This valve can also be used for bottling directly from your Fermenter.This tri-clamp sample valve with racking arm will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc.AISI 304 stainless-steel.Mounted valve for easy opening and closing.Easy to clean.Easy to mount.Tri-clamp standard.

This is a stainless-steel tri-clamp sample valve with a rotating rack arm mounted on a 3/8" tap with 13 mm barb. It is easy to mount.This valve can also be used for bottling directly from your Fermenter.This tri-clamp sample valve with racking arm will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc.AISI 304 stainless-steel.Mounted valve for easy opening and closing.Easy to clean.Easy to mount.Tri-clamp standard.

Butterfly Tap 15mm

Coobra CB3 Pro Control Unit. Spare part.

A complete minikeg kit Oxebar with gas bottle included.

Coobra CB3 Malt basket. Spare part.

Complete kit for carbonation and bottling from 18L Cornelius keg with ball connection to iTap X. Contains everything in the picture, iTap X counter pressure filler for crown bottles, 18L Cornelius keg (used), Regulator & Carbonation cartridge for soda stream as well as all connections, adapters and hose (hose comes in a full length that can be cut in suitable lengths). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.

Brewolution Chiller 16 meters (3/8" tube) in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Suitable for breweries, pots and kettles up to 70L. Fits 3/8" pushfit connectors, perfekt for hose with 3/8" (9,5mm) outer diameter. Fittings and hose not included.Diameter 30 cm.Height 53 cm.

Brewolution Fittings and tubes Kit for Chiller 40 and 70. 2 x Fittings connector 3/8”, tap adaptor, tap connector and 2 x 1,5 m. tube is included.

Spare part. Brewly Malt Basket Ring for 40L/70L Brewery

Coobra Universal thermostat with EU-connections for cooling & heating at the same time and control both manually and via Wifi app.Perfect for home brewing, fermentation breeding, incubation, greenhouse, etc.- Intelligent digital display temperature controlled outlets- Temperature range -30 - 105 ℃- Supports both Celcius and Fahrenheit- WiFi 2.4GHz wireless connection- Mobile Smartlife APP control- Manual control or app controlled.- Double relay output: connect cooling & heating at the same time- automatic alarm for high/low temperature- temperature peak, Update once in 1s- Heating/cooling mode- temperature unit conversion- Programmable in up to 7 day intervals- compressor delay protection.- Temperature sensor with 150cm cord and suction cup for fastening.

Brewolution Sight Glass Plug for Brewster Beacon. Spare part.Level Gauge Plug for Brewster Beacon. Placed at the top of the Level Gauge.

Brewolution Seal for Sight Glass Plug for Brewster Beacon. Spare part.Seal for Level Gauge Plug for Brewster Beacon. Diameter:Outer: 15mmInner: 8mm Thickness: 3mm

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x37 mm (each label)- 16 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1600 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x148 mm (each label)- 4 labels per A4 sheet- Total 100 pcs A4 sheets- Total 400 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 199,6x143,5 mm (each label)- 2 labels per A4 sheet- Total 100 pcs A4 sheets- Total 200 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 199,6x289,2 mm (each label)- 1 label per A4 sheet- Total 100 pcs A4 sheets- Total 100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 210x297 mm (each label)- 1 label per A4 sheet- Total 100 pcs A4 sheets- Total 100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 52,5x29,7 mm (each label)- 40 labels per A4 sheet- Total 100 pcs A4 sheet- Total 4000 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 70x36mm (each label)- 24 labels per A4 sheet- Total 100 pcs A4 sheet- Total 2400 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x57 mm (each label)- 10 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1000 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x48 mm (each label)- 12 labels per A4 sheet- Total 100 pcs A4 sheets- Total 1200 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Round corners.Specification- 38,1x21,2 mm (each label)- 65 labels per A4 sheet- Total 100 pcs A4 sheet- Total 6500 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 70x25,4mm (each label)- 33 labels per A4 sheet- Total 100 pcs A4 sheet- Total 3300 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 70x41mm (each label)- 21 labels per A4 sheet- Total 100 pcs A4 sheet- Total 2100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles. Note: No round edges on the labels.Specification- 63,5x46,6 mm (each label)- 18 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1800 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Brewly 40L Perforated Malt Basket. New open, perforated design for high wort flow. 304 Stainless steel. Fits Brewly 40L V1 and V2, Höjd: ca 33,5 cmdiameter uppe: ca 37 cmdiameter nere: ca 35 cm

Brewly 70L V2 Perforated Malt Basket. New open, perforated design for high wort flow. 304 Stainless steel. NOTE! Fits only Brewly V2 brewery, not V1 or forst generation 65L & 70L. height: ca 33,5 cmdiameter up: ca 37 cmdiameter down: ca 35 cm

The MK4 Dual Gauge gas regulator (Type 30 for CO2 / Post Mix Gas) is the only regulator you'll ever need to buy. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both kPa, Bar and PSI.The outlet has 1/4" MFL threads, and it comes with a DuoTight (pushfit) converter to 8mm hose.NOTE: This regulator is sold with the Green 65PSI (4.5 BAR) pressure relief valve.

Pressure Relief Valve, releases at ca 2,4 bar. Gasket included.